The continuous UHMWPE fiber reinforced UD non-weft fabric is made by composite processing of specific technology and resin matrix, and then laminated by 0/90º orthogonal composite at the rear end. Its appearance is white fiber flakes. This product has excellent properties such as low density, abrasion resistance, impact resistance, and strong cutting toughness. The product is widely used in special protective materials such as soft bulletproof vests, lightweight bulletproof helmets, and lightweight bulletproof armor Plates, anti-stab, anti-cut clothing linings and special public anti-riot facilities, etc. 1. Use water-based or oil-based adhesives to produce UD unidirectional non-woven fabrics; 2. Fiber types: UHMWPE fiber, aramid fiber, etc.; 3. Production speed: 5-15 m/min; 4. Product width: 1200mm-1600mm, 2000mm-2500mm; 5. Product thickness: 0.1mm-0.3mm;
The continuous UHMWPE fiber reinforced UD non-weft fabric is made by composite processing of specific technology and resin matrix, and then laminated by 0/90º orthogonal composite at the rear end. Its appearance is white fiber flakes. This product has excellent properties such as low density, abrasion resistance, impact resistance, and strong cutting toughness. The product is widely used in special protective materials such as soft bulletproof vests, lightweight bulletproof helmets, and lightweight bulletproof armor Plates, anti-stab, anti-cut clothing linings and special public anti-riot facilities, etc. 1. Use water-based or oil-based adhesives to produce UD unidirectional non-woven fabrics; 2. Fiber types: UHMWPE fiber, aramid fiber, etc.; 3. Production speed: 5-15 m/min; 4. Product width: 1200mm-1600mm, 2000mm-2500mm; 5. Product thickness: 0.1mm-0.3mm;
